Welcome to our world of The
Lithium Ion Phosphate Batteries
& Lead Acid Re-generation Equipment Solutions.

UNMATCHED SAFETY

Built on Lithium Iron Phosphate, our cells provide superior thermal and chemical stability, virtually eliminating the risk of thermal runaway and fire for safer operation

EXTENDED LIFECYCLE

Engineered for Light EVs, delivering consistent, high-power output across the discharge curve, ensuring reliability from the first mile to the last

OPTIMIZED PERFORMANCE

Engineered for Light EVs, delivering consistent, high-power output across the discharge curve, ensuring reliability from the first mile to the last

500⁺

Units Sold

280

Vehicles Mobilzed

98

Units Charged

51.2V 67Ah LiFePO4 Battery

• Product: Cell: Guaranteed Gotin (A+) | BMS: JiaBaida
• Replacement Guarantee: 2 (Two) Years replacement guarantee against manufacturing defects only.
• Charger & Display Warranty: 1 Yr’s;
Enable Richsaw to Run Over 120KM

51.2V 120Ah LiFePO4 Battery

• Product: Cell: Guaranteed Gotin (A+) | BMS: JiaBaida
• Replacement Guarantee: 2 (Two) Years replacement guarantee against manufacturing defects only.
• Charger & Display Warranty: 1 Yr’s
Enable Richsaw to Run Over 120KM

51.2V 180Ah LiFePO4 Battery
• Product: Cell: Guaranteed Gotin (A+) | BMS: JiaBaida
• Replacement Guarantee: 2 (Two) Years replacement guarantee against manufacturing defects only.
• Charger & Display Warranty: 1 Yr’s

Enable Easy Bike to Run Over 180KM

Lead-Acid Regenerating Equipment

【Product Introduction】
This product is a multi-functional repair electrolyte specially designed for lead-acid batteries. With a stable and mild formula, it can be used as a battery repair liquid, as well as a standard electrolyte for battery replacement and refilling. It effectively dissolves sulfation crystals on electrode plates, activates battery performance, and resolves common ageing issues such as reduced battery life, incomplete charging, unstable voltage and excessive self-discharge. The mild formula causes no damage to electrode plates, effectively restoring aged batteries and extending service life.【Scope of Application】
Suitable for lead-acid batteries of electric vehicles, energy storage devices and UPS systems. It can be used for battery water refilling, old electrolyte replacement, sulfation repair and routine maintenance. After injection, the electrolyte maintains a standard specific gravity for stable repair and maintenance performance.
Repairable conditions: Moderate battery sulfation, reduced cruising range, premature charging cutoff, unbalanced voltage, ageing, and water loss.
Non-repairable conditions: Severe battery bulging, damaged plates, internal short circuit and expired, scrapped batteries.【Standard Operation Procedure】
1. Clean the battery surface, open the top cover and rubber pressure relief caps. There is no need to drain the original electrolyte; retain the basic liquid film on the plates.
2. Inject the product quantitatively according to battery specifications. After filling, the battery electrolyte will maintain a standard specific gravity of 1.10±0.002 (20℃) to meet standard repair conditions.
3. Let the battery stand for 2–4 hours to allow the liquid to fully infiltrate the plates and decompose sulfation crystals.
4. Connect the battery to the BatterGo Multi-functional Regeneration Equipment for professional repair and activation. After the equipment program completes operation, let the battery stand for 2–3 hours. No cyclic repair is required.【Product Features】
Multi-purpose for repair, electrolyte replacement and daily maintenance. High temperature resistance and stable performance without failure. Mild formula protects electrode plates. It balances battery voltage and stabilises cruising performance, suitable for routine maintenance of all types of lead-acid batteries.【Safety Precautions】
1. This product contains a weak acid with slight corrosivity. Wear protective equipment during operation. Avoid direct contact with skin and eyes. In case of contact, rinse immediately with plenty of clean water.
2. Keep away from children and avoid accidental ingestion. Store in a cool, dry and ventilated place, away from fire, heat sources and alkaline substances.
3. Only used for repair, refilling and maintenance of lead-acid batteries. Not applicable as the original factory electrolyte for battery production and assembly. Do not dilute or mix with other liquids, and do not fill new fully filled batteries.
4. Seal the bottle tightly after use and store it away from light.【Storage & Shelf Life】
Storage: Sealed storage in a cool and ventilated environment at 10℃–35℃
Shelf Life: 6 months (unopened)
【Product Parameters】
Standard Specific Gravity: SG1.10±0.002 (20℃)
Specification: 4.5L/bottle (net weight 4.95kg, excluding bottle)
General Injection Reference: 5–8ml per hole for 12V12Ah batteries; 8–12ml per hole for 12V20Ah batteries. For large-capacity batteries, adjust dosage according to plate proportion to ensure the specific gravity reaches 1.10±0.002.
For further inquiries regarding Lead Acid Regeneration Equipment, please visit our office or contact our Principal Engineer:
Mr. Mirajul Islam
Principal Engineer – Lead Acid Regeneration Systems
Mobile: +880 1324-246692
WhatsApp: +880 1866-240493

Let's start your project with us

• Contact Us Now

BatterGo (SHANGHAI) TECH. CO., LTD

We believe in the potential of batteries

• Facebook

Products

51.2V 67Ah LiFePO4 Battery
51.2V 120Ah LiFePO4 Battery
Enable Mishuk to Run Over 130KMMulti-Functional Battery Regeneration System

Links

• About Us

• Contact

• Technology

Email

[email protected]